Miele G 5000 error codes
5 codes are documented for this machine. 2 of them mean you should stop using it until the fault is fixed.
This page also covers G 6000, G 7000, which report the same set of fault codes as the G 5000.
| Code | What it means | Can you keep using it |
|---|---|---|
| F11 | Water is still sitting in the cabinet at the end of the programme because it has not drained away. The part you need to reach depends on which generation of machine you have, and the two are not the same. | Stop using the machine |
| F12 | Not enough water is reaching the appliance, so it stops rather than running a programme it cannot fill. The manufacturer publishes several numbers for this same condition and gives them the same remedy. | Usable, but not working properly |
| F52 | So much foam has built up inside that the appliance has interrupted the programme. Foam stops the spray arms throwing water properly and can work its way out past the door. | Usable, but not working properly |
| F70 | The waterproof protection system has detected water escaping inside the appliance and has shut it down. The drain pump will keep running on its own until the machine is disconnected from the electricity supply. | Stop using the machine |
| F86 | The flap covering the salt reservoir in the door has been left open. This is a prompt rather than a breakdown, but it needs dealing with before the next programme. | Usable, but not working properly |
See every Miele dishwasher code, including codes that have not been confirmed as applying to this model.